Santec manufactures unique test and measurement
instruments that determine a range of parameters that are important
for characterization of modern optical systems. Our objective is
to provide the engineer with the best tools to accurately evaluate
today's optical components, modules and systems. Our range includes
systems for tunable channel drop filtering, polarization mode dispersion
assessment, polarization analysis, polarization extinction ratio
measurement, power monitoring and stabilization, and optical mode
field parameter testing. These instruments compliment our tunable
lasers and components to make Santec your first stop for complete
optical testing solutions.
 |
|
 |
|
|
| The OTF-950 is a versatile bench-top optical tunable
filter that allows both wavelength tuning and passband
width selection simultaneously and independently.
|
|
|
|
 |
 |
|
|
The OTF-930 tunable filter utilizes Santec's original "linear sliding" technology to enable precise, continuous wavelength tuning with constant optical properties.
- 80nm wide tuning range, low insertion loss
- Wide variety of filters available. -3dB bandwidth of 0.25 nm and above.
- Low PDL and low PMD
- Peak search function
|
|
|
| A 40 nm optical tunable filter and variable optical attenuator are combined into one unit. Channel selection with automatic power adjustment can be achieved simultaneously. |
|
|
|
 |
|
|
| The OVA-920 provides
up to 60 dB of attenuation, with an ultra-precise resolution
of 0.001 dB and low minimum insertion loss (2.0 dB). This fully
GPIB-controllable, high-specification unit is well suited to
both laboratory and production environments. |
| |
60dB attenuation range |
| |
0.001dB resolution |
| |
<2.0dB insertion loss |
| |
+23dBm maximum input power |
| |
APC(Automatic Power
Control) function |
|
|
|
 |
 |
|
| The PEM-320 has been designed
meet the challenges of accurate and rapid alignment of optical
components to polarization maintaining fiber. The instrument
uses a rapidly rotating polarizer to provide real-time, simultaneous
measurements of PER, polarization angle and optical power. |
| |
40dB PER measurement |
| |
0.1sec measurement speed |
| |
Simultaneous display of PER, polarization
angle and optical power |
| |
1550, 1480, 1310nm versions available |
|
|
|
 |
 |
Mode Field Diameter Measurement System |
| MFD-1000 is developed
for analyzing the optical mode field diameter for many types
of waveguide and optical fiber. The semi-automatic system contributes
to quality control of small quantity test and research and development
facilities. |
| |
Circular arc scanning technique
with FFP method |
| |
>50dB dynamic range |
| |
TE and TM mode available |
|
|
|
 |
 |
Polarization Mode Dispersion Measurement
System |
| The PMD-6000B is
a fully automatic polarization mode dispersion test system,
adopting an interferometric technique that complies with the
international industry standards (ITU-T and IEC). Accurate PMD
measurement can be achieved with high resolution (0.6 fsec)
and high speed. |
| |
0.6 fsec resolution by the interferometic
technique |
| |
Suitable for low PMD device measurements |
| |
Gaussian fitting support for long
length fiber |
| |
/
Optical Fiber Chromatic Dispersion Measurement
System |
| The SDA-6000A/6000B is a fully
automatic chromatic dispersion test system for optical fiber
adopting the air path type interferometric technique. Accurate
measurement can be done using very short length fiber (e.g.
1.3m). |
| |
Air path type interferometric
technique |
| |
600~1200nm measurement range (SDA-6000A) |
| |
1260~1600nm measurement range
(SDA-6000B) |
