E-Newsletter [New products and CLEO 2019]

E-Newsletter [New products and CLEO 2019]

April 25, 2019
Join us at CLEO 2019 show
We’ll be unveiling a range of new instruments for optical test and measurement.
  1. Integrated swept laser test systems incorporating our new power meter MPM-210
  2. High Performance Tunable Lasers
  3. High-Power LCOS spatial light modulator

CLEO 2019

Date: May 7 – 9, 2019
Location: San Jose McEnery Convention Center, San Jose, California, USA
Booth: #2235

New! Swept Test System

The Santec Swept Test System has been developed to streamline photonic testing, providing a complete solution where high-speed analysis, along with high resolution and accuracy are key. Combining one of Santec tunable lasers (TSL-Series) with a Santec optical power meter (MPM-210), a polarization control unit (PCU-100) and custom software, the complete Swept Test System optimizes WDL and PDL measurement for use in both R&D and production environments.

  • Real-time power referencing
  • Rescaling algorithm
  • Multi-channel measurement is available.
  • Supporting control software

Swept Test System

Santec’s TSL series TSL-770/TSL-710/TSL-550

The TSL series is santec’s line of high performance tunable lasers. In addition to the laser’s 0.1pm wavlength setting resolution, the TSL offers a maximum output power specification of over +13dBm and high signal-to-noise ratio over 90dB/0.1nm, making these lasers an ideal choice for a range of applications. The lasers also come equipped with fine-tuning and coherence control as sandard options.

  • Fastest Tuning : 200 nm/s Rapid Sweep
  • High Output power : +13dBm
  • High Signal-to-Noise Ratio : 90dB/0.1nm
  • WDL & PDL Measurement
  • Silicon Photonics Characterization

High-Power LCOS spatial light modulator SLM-300

Santec has introduced a high-power durable LCOS spatial light modulator (SLM) (product code: SLM-300) with enhanced Liquid Crystal on Silicon (LCOS).
The SLM-300 has been tested to withstand up to 200 Watts of power, making it the world’s most durable SLM. When compared with Santec’s conventional SLM-200, the SLM-300 displays over 100 times higher power durability, making it an ideal choice for high-power laser processing, 3D-Printing and IC trimming applications.

Coming events

1/CLEO 2019 (May 7 – 9, 2019)

San Jose McEnery Convention Center, San Jose, California, USA
Booth #2235
CLEO 2019

2/Laser World of Photonics (Jun 24 – 27, 2019)
Messe Munchen, Munich, Germany
Booth #435
PIC International

General product guide 2019


To order any of our products, or to receive technical specifications,visit our web site www.santec.com or contact us at Toll Free +1-800-726-8321(santec-1)If you’d like to Unsubscribe from future Santec E-Newsletters, please respond to this message with “Unsubscribe” in the subject line.