Outstanding Performance
SLM-20
The SLM-20 is a spatial light modulator for industrial applications. The SLM-20 consists of a compact LCOS head module and driver board, enabling easy integration into systems requiring accurate wavefront control, especially laser processing and microscopic applications.
Item | min. | max. | Units | Notes |
---|---|---|---|---|
Wavelength range | 400 | 1600 | nm | No AR coating, refer to table for available AR coating ranges. |
Phase depth | 2π | – | rad. | |
Response time 1) Tr / Tf |
Typ. 300 | ms | ||
Frame rate | 60 or 120 | Hz | ||
Panel reflectivity 2) | Typ. >70@532 nm | % | ||
Aperture ratio | 95 | % | ||
Pixel size / pitch | 7.8 / 8.0 | μm | ||
Panel size | (H) 15.36 x (V) 9.60 | mm | Active area | |
Panel resolution 3) | (H) 1920 x (V) 1200 | pixel | ||
LCOS drive frequency | 1200 | Hz | ||
Phase stability | Typ. < 0.001π | rad. | ||
Gray level | 10 (1024 levels) | bit | ||
Optical power handling 4) | Typ.10 | W/cm² | ||
Operating temperature | 15 | 35 | ℃ | No condensation |
Storage temperature | 0 | 40 | ℃ | No condensation |
Interface | DVI*/ USB 3.0 / Trigger IN, OUT (SMB) | – | *10-bit using RGB 8-bit, 3 colors | |
Control software | GUI software and SDK for Windows | – | C#, Python, Matlab, Labview |
1) Response time is a typical value and is not affected by frame rate.
Tr: Rise time between 10% and 90% levels in a phase change of 0 to 1023 bit (2π rad.) at 25℃.
Tf: Fall time between 90% and 10% levels in a phase change of 1023 to 0 bit (2π rad.) at 25℃.
2) Zero-order reflection.
Depending on specified wavelength range.
3) Specification on the defect pixels are no object.
4) The value is not guaranteed.Depending on the conditions of the laser oscillator used,
the product's life may be significantly shortened due to accumulated exposure time.
Item | -00 | -01 | -02 | -03 | -04 | -12 | -14 | -21 | Unit |
---|---|---|---|---|---|---|---|---|---|
Wavelength range 5) | no coating | 450-550 | 750-850 | 1000-1100 | 1500-1600 | 400-700 | 450-550 / 1500-1600 | 450-1600 | nm |
AR coating reflectance 6) | 4 | < 0.5 | < 0.5 | < 0.5 | < 0.5 | < 1.5 | < 0.6 | < 2.5 | % |
Yes, we can provide reflectance data. Please contact us.